IoT- Application Based on Control and Monitoring System for Single-Phase Induction Motor
DOI:
https://doi.org/10.15662/IJEETR.2026.0802145Keywords:
IoT, relay actuation, induction mo- tor, fault detection, real-time monitoringAbstract
The system uses the ESP32S microcontroller which supports built in Wi- Fi and Bluetooth, enabling wireless control and real time monitoring of the induction motor. Sensors includ- ing voltage, temperature, and vibration are integrated to con- tinuously monitor the motor and detect faults like overcurrent, overheating, and abnormal vibrations. The Blynk application allows users to remotely view sensor readings, receive alerts, and control various parameters through a mobile device, improving ease of access and responsiveness. Load and voltage control is achieved using components like a relay module, dimmer, and potentiometer, allowing precise adjustment to enhance motor ef- ficiency and protect against voltage fluctuations Designed for both industrial and home applications, the system provides a reliable, smart solution for extending motor life and reducing maintenance through automated protection and monitoring features
References
1. Munirun Nessa, Nafuna Margaret, Md Tanvir Al Islam, Azmeri Maisha Zaman, Md Saif Kabir, Mohammed Thushar Imran, IoT-Based Fault Detection and Actuation System for Single-Phase Induction Motors 2025 IEEE International Conference on Emerging Trends in Engineering and Computing (ETECOM) — 979-8-3315-6616-6/25/31.00 ©2025 IEEE— DOI: 10.1109/ETECOM66111.2025.11319087
2. N. A. Mohammed, O. F. Abdulateef, and A. H. Hamad, “An IoT and machine learning-based predictive maintenance system for electrical motors,” Journal Europe´en des Syste`mes Automatise´s, vol. 56, no. 4,pp. 541–550, Aug. 2023.
3. S. F. Chevtchenko, M. C. M. dos Santos, D. M. Vieira, et al., “Predictive maintenance model based on anomaly detection in induction motors: A machine learning approach using real-time IoT data,” arXiv preprint, Oct. 2023.
4. “An IoT-based monitoring system for induction motor faults utilizing deep learning models,” Journal of Vibration Engineering Technologies, vol. 11, no. 3, pp. 245–258, Nov. 2022.
5. C.Nagarajan and M.Madheswaran - ‘Stability Analysis of Series Parallel Resonant Converter with Fuzzy Logic Controller Using State Space Techniques’- Taylor &Francis, Electric Power Components and Systems, Vol.39 (8), pp.780-793, May 2011. DOI: 10.1080/15325008.2010.541746
6. C.Nagarajan and M.Madheswaran - ‘Experimental verification and stability state space analysis of CLL-T Series Parallel Resonant Converter’ - Journal of Electrical Engineering, Vol.63 (6), pp.365-372, Dec.2012. DOI: 10.2478/v10187-012-0054-2
7. C.Nagarajan and M.Madheswaran - ‘Performance Analysis of LCL-T Resonant Converter with Fuzzy/PID Using State Space Analysis’- Springer, Electrical Engineering, Vol.93 (3), pp.167-178, September 2011. DOI 10.1007/s00202-011-0203-9
8. S.Tamilselvi, R.Prakash, C.Nagarajan,“Solar System Integrated Smart Grid Utilizing Hybrid Coot-Genetic Algorithm Optimized ANN Controller” Iranian Journal Of Science And Technology-Transactions Of Electrical Engineering, DOI10.1007/s40998-025-00917-z,2025
9. S.Tamilselvi, R.Prakash, C.Nagarajan,“ Adaptive sliding mode control of multilevel grid-connected inverters using reinforcement learning for enhanced LVRT performance” Electric Power Systems Research 253 (2026) 112428, doi.org/10.1016/j.epsr.2025.112428
10. S.Thirunavukkarasu, C. Nagarajan, 2024, “Performance Investigation on OCF and SCF study in BLDC machine using FTANN Controller," Journal of Electrical Engineering And Technology, Volume 20, pages 2675–2688, (2025), doi.org/10.1007/s42835-024-02126-w
11. C. Nagarajan, M.Madheswaran and D.Ramasubramanian- ‘Development of DSP based Robust Control Method for General Resonant Converter Topologies using Transfer Function Model’- Acta Electrotechnica et Informatica Journal , Vol.13 (2), pp.18-31,April-June.2013, DOI: 10.2478/aeei-2013-0025.
12. C.Nagarajan and M.Madheswaran - ‘DSP Based Fuzzy Controller for Series Parallel Resonant converter’- Springer, Frontiers of Electrical and Electronic Engineering, Vol. 7(4), pp. 438-446, Dec.12. DOI 10.1007/s11460-012-0212-0.
13. C.Nagarajan and M.Madheswaran - ‘Experimental Study and steady state stability analysis of CLL-T Series Parallel Resonant Converter with Fuzzy controller using State Space Analysis’- Iranian Journal of Electrical & Electronic Engineering, Vol.8 (3), pp.259-267, September 2012.
14. C.Nagarajan and M.Madheswaran, “Analysis and Simulation of LCL Series Resonant Full Bridge Converter Using PWM Technique with Load Independent Operation” has been presented in ICTES’08, a IEEE / IET International Conference organized by M.G.R.University, Chennai.Vol.no.1, pp.190-195, Dec.2007
15. Suganthi Mullainathan, Ramesh Natarajan, “An SPSS and CNN modelling based quality assessment using ceramic materials and membrane filtration techniques”, Revista Materia (Rio J.) Vol. 30, 2025, DOI: https://doi.org/10.1590/1517-7076-RMAT-2024-0721
16. M Suganthi, N Ramesh, “Treatment of water using natural zeolite as membrane filter”, Journal of Environmental Protection and Ecology, Volume 23, Issue 2, pp: 520-530,2022
17. S. Kumar, A. Sharma, and P. Verma, “Real-time motor health monitoring system using IoT,” in Proceedings of the International Conference on Engineering Research and Technology (IJERT), 2019, pp. 33–40.
18. M. Alam, T. Das, and R. Bose, “IoT-based condition monitoring of an induction motor,” in Proceedings of the IEEE Calcutta Conference (CALCON), 2018, pp. 21–26.
19. R. Singh, V. Patil, and S. Mehta, “An IoT-based monitoring system for induction motor faults utilizing machine learning,” SN Applied Sciences, vol. 4, no. 1, 2022.
20. L. Kamelia, F. Rahman, and H. S. Taufiq, “Implementation of IoT- based real-time motor health monitoring using ThingSpeak,” Journal of Electrical Engineering and Technology, 2020.
21. U. Pallevada, R. K. Nair, and A. Ghosh, “Motor fault detection using im- age processing and CNNs,” IEEE Transactions on Industrial Electronics, 2021. [Online].
22. M. S. Kabir and S. Alam, “Impact of machine learning and deep learning on biomedical applications and healthcare industry,” Reflection, vol. 1,
23. pp. 142–149, 2024
24. S. Yamada, H. Akagi, and T. A. Lipo, “Quantification of induction motor bearing fault severity based on motor current signature analysis,” IEEE Transactions on Industry Applications, vol. 39, no. 5, pp. 1238– 1244,
25. Sept./Oct. 2003
26. R. Kumar, M. Singh, and P. Sharma, “Machine learning-based predictive maintenance for industrial motors,” IEEE Transactions on Industrial Electronics, vol. 68, no. 4, pp. 3215–3225, 2023.
27. J. Brown and K. Patel, “Cloud-enabled industrial IoT for smart moni- toring and predictive analytics,” Sensors and Actuators A: Physical, vol. 305, p. 111940, 2022.
28. L. Wang, H. Li, and T. Zhang, “Edge computing for IoT-based smart monitoring systems,” IEEE Internet of Things
29. Mathew, A. (2025). Human–AI Collaboration in Security Operations: Measuring Alert Trust, Automation Bias, and Analyst Upskilling in AI-Augmented SOC Environments. International Journal of Computer Technology and Electronics Communication, 8(5), 11375-11380.
30. Vimal Raja, G. (2021). Mining Customer Sentiments from Financial Feedback and Reviews using Data Mining Algorithms. International Journal of Innovative Research in Computer and Communication Engineering, 9(12), 14705-14710.
31. Rajasekar, M. (2024). Real-Time Predictive DevOps Intelligence for Risk-Aware Digital Business Processes in Cloud and SAP Ecosystems. International Journal of Advanced Research in Computer Science & Technology (IJARCST), 7(4), 10713-10718.
32. Sruthi, R. S., Ananya, S., & Murugeshwari, B. (2010). Web Based Virtual Control System Laboratory and On-Line Temperature Control of Electrophoresis Equipment using LabVIEW. International Journal of Computer Applications, 975, 8887.
33. Anand, L. (2025). A Novel EEG-Based Deep Learning Framework for Enhancing Communication in Locked-In Syndrome Using P300 Speller and Attention Mechanisms. KSII TRANSACTIONS ON INTERNET AND INFORMATION SYSTEMS, 19(11), 3841-3855.
34. Vimal, V. R. (2025). Next Generation Enterprise Architecture for SAP Cloud Systems Leveraging AI Driven Analytics and Hybrid Infrastructure. International Journal of Engineering & Extended Technologies Research (IJEETR), 7(6), 11174-11182.
35. Sugumar, R. (2025). Designing Resilient and Scalable Cloud-Native Frameworks for Generative AI Content Production. International Journal of Research Publications in Engineering, Technology and Management (IJRPETM), 8(6), 13268-13279.
36. Rajasekar, M., Mukil, A., & Lakshamanan, R. (2024, August). Segmentation and evaluation of multiple sclerosis in flair modality MRI with ResUNet. In AIP Conference Proceedings (Vol. 3161, No. 1, p. 020314). AIP Publishing LLC.
