Esp32 Microcontroller Based Braille CNC Printer
DOI:
https://doi.org/10.15662/IJEETR.2026.0802132Keywords:
ESP32, Braille Printer, CNC Machine, Assistive Technology, Embedded Systems, Tactile Printing, , IoT AutomationAbstract
An ESP32-based CNC Braille printer is a tactile printing device designed to emboss Braille dots using CNC motion control. It converts digital text into raised patterns readable by touch, aiding visually impaired users. Compared to Arduino, ESP32 offers superior processing speed and dual-core performance. Built-in Wi-Fi and Bluetooth enable wireless control and remote updates. The printer uses stepper motors and servo mechanisms for precise dot placement. ESP32 supports SPIFFS for onboard Braille file storage and retrieval. Voice input integration allows hands-free operation and accessibility. Real-time text-to-Braille conversion is faster due to ESP32’s higher clock rate. Arduino-based systems often require external modules for connectivity. ESP32’s larger memory supports complex firmware and multitasking. The printer can be controlled via mobile apps or web interfaces. It’s cost-effective and scalable for educational and assistive tech use. Open-source libraries and community support enhance development. The design promotes inclusive technology and digital literacy It bridges the gap between IoT and accessibility solutions. ESP32 makes Braille printing smarter, faster, and more connected.
References
1. Apurva, A., Thakur, P., & Misra, A. (2017). Aiding the visually impaired: Developing an efficient Braille printer. 2017 International Conference on Advances in Computing, Communications and Informatics (ICACCI).
2. Beatrix, M., Wahab, W., & Wulandari, M. (2025). Design of a Braille Printer Based on ESP32 Microcontroller with Voice Input. Green Intelligent Systems and Applications, 5(1), 26–39.
3. Gürevin, B., & Güney, E. (2023). A Study on the Design of a Braille Printer Working on a Microcomputer. International Conference on Recent and Innovative Results in Engineering and Technology, 17–21.
4. Shirsekar, S. S. (2017). Learning Aid in Braille and Typography. International Journal of Engineering Research & Technology, 6(05).
5. N. El-Amin, “The Difference Between Traditional Braille Embossing and Digital Printing Embossing Using Inks,” Mediterranean Journal of Applied Sciences and Arts (MJAF), vol. 10, no. 4, pp. 35–44, 2021. [Online]. Available: https://mjaf.journals.ekb.eg/article_136950_d405b1afbb6695ffad3bb4f8f9e9b703.pdf
6. Anderson, G. (2016). Motion Control for CNC & Robotics. Practical Guides for Industrial Technicians.
7. Cameron, N. (2023). ESP32 Formats and Communication: Application of Communication Protocols with ESP32 Microcontroller. Apress.
8. Di Jasio, L. (2010). Programming 32-bit Microcontrollers in C. Newnes.
9. Morshed, B. I. (2021). Embedded Systems – A Hardware-Software Co-Design Approach: Unleash the Power of Arduino!. Springer.
10. Zulfiqar, A. (2021). Hands-on ESP32 with Arduino IDE. Packt.
11. R. K. Sharma and S. Kumar, “Empowering the Visually Impaired: Braille Printer Edition,” Journal of Emerging Technologies and Innovative Research (JETIR), vol. 11, no. 4, pp. 765–769, 2024. [Online]. Available: https://www.jetir.org/papers/JETIR2404726.pdf
12. P. K. Raj and R. George, “Economical Speech to Braille Printer,” Journal of Emerging Technologies and Innovative Research (JETIR), vol. 9, no. 4, pp. 1250–1254, 2022. [Online]. Available:
13. C.Nagarajan and M.Madheswaran - ‘Stability Analysis of Series Parallel Resonant Converter with Fuzzy Logic Controller Using State Space Techniques’- Taylor &Francis, Electric Power Components and Systems, Vol.39 (8), pp.780-793, May 2011. DOI: 10.1080/15325008.2010.541746
14. C.Nagarajan and M.Madheswaran - ‘Experimental verification and stability state space analysis of CLL-T Series Parallel Resonant Converter’ - Journal of Electrical Engineering, Vol.63 (6), pp.365-372, Dec.2012. DOI: 10.2478/v10187-012-0054-2
15. C.Nagarajan and M.Madheswaran - ‘Performance Analysis of LCL-T Resonant Converter with Fuzzy/PID Using State Space Analysis’- Springer, Electrical Engineering, Vol.93 (3), pp.167-178, September 2011. DOI 10.1007/s00202-011-0203-9
16. S.Tamilselvi, R.Prakash, C.Nagarajan,“Solar System Integrated Smart Grid Utilizing Hybrid Coot-Genetic Algorithm Optimized ANN Controller” Iranian Journal Of Science And Technology-Transactions Of Electrical Engineering, DOI10.1007/s40998-025-00917-z,2025
17. S.Tamilselvi, R.Prakash, C.Nagarajan,“ Adaptive sliding mode control of multilevel grid-connected inverters using reinforcement learning for enhanced LVRT performance” Electric Power Systems Research 253 (2026) 112428, doi.org/10.1016/j.epsr.2025.112428
18. S.Thirunavukkarasu, C. Nagarajan, 2024, “Performance Investigation on OCF and SCF study in BLDC machine using FTANN Controller," Journal of Electrical Engineering And Technology, Volume 20, pages 2675–2688, (2025), doi.org/10.1007/s42835-024-02126-w
19. C. Nagarajan, M.Madheswaran and D.Ramasubramanian- ‘Development of DSP based Robust Control Method for General Resonant Converter Topologies using Transfer Function Model’- Acta Electrotechnica et Informatica Journal , Vol.13 (2), pp.18-31,April-June.2013, DOI: 10.2478/aeei-2013-0025.
20. C.Nagarajan and M.Madheswaran - ‘DSP Based Fuzzy Controller for Series Parallel Resonant converter’- Springer, Frontiers of Electrical and Electronic Engineering, Vol. 7(4), pp. 438-446, Dec.12. DOI 10.1007/s11460-012-0212-0.
21. C.Nagarajan and M.Madheswaran - ‘Experimental Study and steady state stability analysis of CLL-T Series Parallel Resonant Converter with Fuzzy controller using State Space Analysis’- Iranian Journal of Electrical & Electronic Engineering, Vol.8 (3), pp.259-267, September 2012.
22. C.Nagarajan and M.Madheswaran, “Analysis and Simulation of LCL Series Resonant Full Bridge Converter Using PWM Technique with Load Independent Operation” has been presented in ICTES’08, a IEEE / IET International Conference organized by M.G.R.University, Chennai.Vol.no.1, pp.190-195, Dec.2007
23. Suganthi Mullainathan, Ramesh Natarajan, “An SPSS and CNN modelling based quality assessment using ceramic materials and membrane filtration techniques”, Revista Materia (Rio J.) Vol. 30, 2025, DOI: https://doi.org/10.1590/1517-7076-RMAT-2024-0721
24. M Suganthi, N Ramesh, “Treatment of water using natural zeolite as membrane filter”, Journal of Environmental Protection and Ecology, Volume 23, Issue 2, pp: 520-530,2022
25. A. Ouellette, “Low Cost, Compact Braille Printing Head for Use in a Handheld Device,” Master’s Thesi , Northeastern University, 2015. [Online]. Available : https://repository.library.northeastern.edu/files/neu%3A1672/fulltext.pdf
26. M. Krishnan and R. Subramanian, “A Cost-Effective Braille Printer: Aiding the Visually Impaired,” Manipal Journal of Science and Technology, vol. 5, no. 2, pp. 56–61, 2023. [Online]. Availabl : https://impressions.manipal.edu/cgi/viewcontent.cgi?article=1016&context=mjs
27. J. Williams, “The Braille Must Go Through: A Review of Two Lower-Cost Braille Printers,” AccessWorld: Technology and People Who Are Blind or Visually Impaired, vol. 3, no. 6, pp. 1–5, 2021. [Online]. Available: https://www.afb.org/aw/3/6/14896
28. Tamizharasi, S., Rubini, P., Saravana Kumar, S., & Arockiam, D. Adapting federated learning-based AI models to dynamic cyberthreats in pervasive IoT environments.
29. Socrates, S., Shanmugapriya, M., Murugeshwari, B., & Angalaeswari, S. (2024). Efficient Design for Implantable Device Constant Current Induction Doubly Fed Generating Incorporating Grid Connectivity. In Intelligent Solutions for Sustainable Power Grids (pp. 382-392). IGI Global Scientific Publishing.
30. Mathew, A. (2025). Human–AI Collaboration in Security Operations: Measuring Alert Trust, Automation Bias, and Analyst Upskilling in AI-Augmented SOC Environments. International Journal of Computer Technology and Electronics Communication, 8(5), 11375-11380.
31. Vimal Raja, G. (2021). Mining Customer Sentiments from Financial Feedback and Reviews using Data Mining Algorithms. International Journal of Innovative Research in Computer and Communication Engineering, 9(12), 14705-14710.
32. Rajasekar, M. (2024). Real-Time Predictive DevOps Intelligence for Risk-Aware Digital Business Processes in Cloud and SAP Ecosystems. International Journal of Advanced Research in Computer Science & Technology (IJARCST), 7(4), 10713-10718.
33. Sruthi, R. S., Ananya, S., & Murugeshwari, B. (2010). Web Based Virtual Control System Laboratory and On-Line Temperature Control of Electrophoresis Equipment using LabVIEW. International Journal of Computer Applications, 975, 8887.
34. Anand, L. (2025). A Novel EEG-Based Deep Learning Framework for Enhancing Communication in Locked-In Syndrome Using P300 Speller and Attention Mechanisms. KSII TRANSACTIONS ON INTERNET AND INFORMATION SYSTEMS, 19(11), 3841-3855.
35. Vimal, V. R. (2025). Next Generation Enterprise Architecture for SAP Cloud Systems Leveraging AI Driven Analytics and Hybrid Infrastructure. International Journal of Engineering & Extended Technologies Research (IJEETR), 7(6), 11174-11182.
